This provides power savings during idle network activity. Energy Efficient Ethernet (EEE) as per 802.3az.Utilizes Green Ethernet energy saving technology based on industry standards such as: This provides fault notification to the partner device attached to the 10G Ethernet interface of the media converter. With Fiber Fault Alert the state of the 10 Gigabit Ethernet receiver is passed to the transmitter. When Smart Link Pass-Through is disabled, if a link loss is detected on one port the transmit signal remains enabled on the other port. This enables managed switches and other devices to report link failures to their network NMS. In this mode, if a link loss is detected on one port, the transmit signal on the other port is disabled “passing through” the state of the failed link. When Smart Link Pass-Through is enabled (default), each port will reflect the state of its port peer. The media converter supports auto negotiation on Ethernet copper interface portįull and half duplex operation is supported The Media Converter supports 1000Mbps SGMII SFPs Forwarding of a packet will begin as soon as the destination address is processed.Īutomatically detects whether a SFP has been inserted and adjusts the speed accordingly. This will increase the media converter’s throughput and reduce latency by performing packet forwarding in the most efficient manner possible. When the same Ethernet speed for both ports is enabled, the Media Converter can be configured for Cut-Through Forwarding. The Media Converter can automatically detect Ethernet port speed and do a rate conversion between the two ports if the Ethernet speed is different. S-10GRT-SFP Media Converter Features Rate Conversion If you need a Media Converter that can operate in a managed environment with AAA security, check out the SMI-10GRT-SFP. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make the Perle S-10GRT-SFP Media Converter the smart choice for IT professionals. This allows for more efficient troubleshooting and less on-site maintenance. Network Administrators can “see-everything” with Perle’s advanced features such as Smart Link Pass-Through, Fiber Fault Alert and Loopback. The Perle S-10GRT-SFP Media Converter provides an economical path to extend Ethernet data transmission distances or convert network speeds. The empty transceiver port on the S-10GRT-SFP Media Converter allows for flexible network configurations to meet any requirement using a variety of transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs. Copper to copper is achieved by inserting SFP+ Direct Attach Cable (DAC), also known as twinax. This will increase the media converter’s throughput and reduce latency by performing packet forwarding in the most efficient manner possible.Ĭopper to Fiber conversion is achieved by inserting SFP or SFP+ fiber transceivers that support multimode and single-mode fiber, including CWDM/DWDM wavelengths. Cut-Through Forwarding can be configured for environments where throughput speed is critical.This is ideal in scenarios where disparate networks need to be connected. 10/100/1000/2.5G/10G rate conversion can be enabled to automatically detect Ethernet port speed and do a rate conversion between the two ports if the Ethernet speed is different.The S-10GRT-SFP Media Converter supports key features for ultimate network flexibility and growth. Each Media Converter comes with one RJ45 Ethernet 10GBase-T port and an empty slot for one SFP or SFP+ module. The Perle S-10GRT-SFP Media Converter transparently connects 10/100/1000/2.5G/10GBase-T Ethernet links over multimode or single mode fiber.
0 Comments
Leave a Reply. |